SOPRALENE® 250 FR GR HC SKU: 01957

SOPRALENE® 250 FR GR HC SKU: 01957
SOPRALENE 250 FR GR HC (fire retardant, granulated, hybrid cap) is an SBS modified bitumen cap ply for use in approved multi-ply membrane and flashing assemblies. SOPRALENE 250 FR GR HC is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with tough, dimensionally stable non-woven polyester mat specifically designed for use as a cap sheet over built up roofing. The topside is surfaced with ceramic coated granules and the underside is surfaced with fine mineral aggregate to
facilitate cold adhesive application.
Product Properties
- ASTM ASTM D6164
- Component Cap
- Installation Method Cold Adhered, Asphalt Adhered
- Reinforcement Polyester
- Thickness 160 mils (4.0 mm)
- Topside Granules
- Underside Sanded
Installation
Prior to installation, unroll SOPRALENE 250 FR GR HC onto the roof surface and allow to relax. Place SOPRALENE 250 FR GR HC in desired position and back roll the product. Apply approved cold adhesive following manufacturer specifications. SOPRALENE 250 FR GR HC is then rolled into the cold adhesive and rolled with a weighted roller. Refer to the SOPREMA SBS Roofing Guide for additional application guidelines.
Testing & Approvals



Related Products
ALSAN® RS 263 LO SELF-LEVELING MORTAR
ALSAN RS 263 LO Self-Leveling Mortar is created by combining ALSAN RS 240 LO and ALSAN RS 223 Mixing Powder….
View Product
COLPHENE® 180 SP
COLPHENE® 180 SP is an SBS-modified bitumen base ply reinforced with fine mineral aggregate. The underside is surfaced with polyolefin burn-off film to optimize heat welding.
View Product
ELASTOPHENE® ULTRA-STICK
ELASTOPHENE ULTRA-STICK is an SBS-modified bitumen, self-adhered base sheet for use in approved multi-ply membrane and flashing assemblies. ELASTOPHENE ULTRA-STICK…
View ProductRelated Projects
John R. Oishei Children’s Hospital – Buffalo, New York
SOPREMA’s SOPRASEAL® Xpress G air and vapor barrier was ideal for this project. The exterior grade, inorganic faced gypsum board with an air and vapor barrier factory applied to the exterior surface, is the first and only ABAA evaluated assembly. SOPRASEAL® Xpress G boards are mechanically fastened to the structure using corrosion resistant SOPRASEAL® Xpress G Screws. A 6 inch self-adhered strip of SOPRASEAL® Stick 1100T is then installed over all board joints.