SOPRALENE® 250 SP 4.0 SKU: 00603

SOPRALENE® 250 SP 4.0 SKU: 00603
SOPRALENE 250 SP 4.0 is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. SOPRALENE 250 SP 4.0 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable non-woven polyester mat. The topside is surface with fine mineral aggregate and underside is surfaced with polyolefin burn-off film to optimize heat welding.
Product Properties
- ASTM ASTM D6164
- Component Base
- Installation Method Heat Welded
- Reinforcement Polyester
- Thickness (minimum) 150 mils (3.8 mm)
- Thickness (nominal) 157 mils (4.0 mm)
- Topside Sanded
- Underside Burn Off Film
Installation
Prior to installation, unroll SOPRALENE 250 SP 4.0 onto the roof surface and allow to relax. Position SOPRALENE 250 SP 4.0 in desired position and back roll the product. SOPRALENE 250 SP 4.0 is then heat welded to approved substrates. Subsequent approved inter-ply or cap ply membranes are applied to SOPRALENE 250 SP 4.0 via cold adhesive. Refer to the SOPREMA SBS Roofing Guide for additional application guidelines.
Testing & Approvals




Related Products
SOPRAFIX® BASE 622
SOPRAFIX BASE 622 is an SBS-modified bitumen membrane designed specifically for mechanical attachment to approved roof decks. SOPRAFIX BASE 622…
View Product
2-1 SOPRASMART ROCK
2-1 SOPRASMART ROCK is a high performance panel composed of an SBS-modified bitumen base membrane and HD SOPRAROCK high density…
View Product
SOPRA-XPS 20
SOPRA-XPS 20 is a rigid thermal insulation board made of extruded polystyrene. It is composed of closed cell foam. It…
View ProductRelated Projects
John R. Oishei Children’s Hospital – Buffalo, New York
SOPREMA’s SOPRASEAL® Xpress G air and vapor barrier was ideal for this project. The exterior grade, inorganic faced gypsum board with an air and vapor barrier factory applied to the exterior surface, is the first and only ABAA evaluated assembly. SOPRASEAL® Xpress G boards are mechanically fastened to the structure using corrosion resistant SOPRASEAL® Xpress G Screws. A 6 inch self-adhered strip of SOPRASEAL® Stick 1100T is then installed over all board joints.
Boston Prudential Tower – Boston Massachusetts
“With SOPREMA®, we knew we were assured of experience, quality and a solid reputation,” states Jim Justus. “SOPREMA’s multi-ply system provided superior puncture and tear resistance and their past history indicated the products would exceed the owner’s requirements.