Search

SOPRALENE® FLAM 250 FR+ GR SKU: 01314

SOPRALENE® FLAM 250 FR+ GR SKU: 01314

SOPRALENE® Flam 250 FR+ GR (fire retardant, granulated) is an SBS-modified bitumen cap ply for use in approved multi-ply membrane and flashing assemblies. SOPRALENE Flam 250 FR+ GR is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with tough, dimensionally stable non-woven polyester mat. The topside is surfaced with ceramic coated granules and underside is surfaced with polyolefin burn-off film to optimize heat welding.

SOPRALENE Flam 250 FR+ GR includes the standard white granules. Contact SOPREMA® Customer Service or your sales representative for other granule color options and special order requirements.

Product Properties

  • ASTM ASTM D6164
  • Component Cap
  • Installation Method Heat Welded
  • Reinforcement Polyester
  • Thickness (minimum) 150 mils (3.8 mm)
  • Thickness (nominal) 157 mils (4.0 mm)
  • Topside Granules
  • Underside Burn Off Film

Installation

Prior to installation, unroll SOPRALENE Flam 250 FR+ GR onto the roof surface and allow to relax. Position SOPRALENE Flam 250 FR+ GR in desired position and back roll the product. SOPRALENE Flam 250 FR+ GR is then heat welded to approved substrates. Refer to the SOPREMA® SBS Roofing Manual for additional application guidelines.

 

Testing & Approvals

Related Products

TRI-FIXX™ FASTENING SYSTEM

The TriFixx™ Fastening System is a plate/nail combination that is utilized for mechanically attaching SOPREMA™ membranes to lightweight insulating concrete…

View Product

2-1 SOPRASMART ROCK

2-1 SOPRASMART ROCK is a high performance panel composed of an SBS-modified bitumen base membrane and SOPRAROCK high density mineral…

View Product

SENTINEL® MOLDED CORNERS

SENTINEL MOLDED CORNERS are injection molded, unreinforced flashings that are installed to flash 90-degree inside and outside corners. SENTINEL MOLDED…

View Product

Related Projects

Museum of the American Revolution – Philadelphia, Pennsylvania

Multiple SOPREMA products ranging from ELASTOPHENE® Flam to the SOPRANATURE® vegetated roofing system were used to complete this project. The Museum of the American Revolution is unique in the fact that it has an exposed SBS roof membrane, extensive vegetated roofs, terrace roofs with pavers and even has some vegetated wall systems. The building resembles 1800’s architecture with a modern flare.

Fishers Island Club – Fishers Island, New York

When it was time to build a new building at the club, SOPREMA products were called into action. On this new building, our COLPHENE® 3000 product was chosen to waterproof the foundation because of its superior strength and adhesion.