SOPREMA

Search

SOPRASEAL® LM 204 VP SKU: A506

SOPRASEAL® LM 204 VP SKU: A506

SOPRASEAL LM 204 VP is a one-component, 98% solids content, liquid applied, vapor-permeable air barrier membrane used in wall construction. SOPRASEAL LM 204 VP is STPE technology that has excellent freeze-thaw characteristics and superior curing in low relative humidity and low temperatures. SOPRASEAL LM 204 VP doesn’t shrink and requires less wet film to achieve dry film thickness. This moisture curable hybrid material is a non-flammable vapor permeable air barrier, which provides moisture protection behind wall claddings such as brick, siding, metal panels, EIFS and stucco. Utilization of a drainage plane is required for stucco cladding.

Product Properties

  • Air Permeability ASTM ASTM E2178
  • Air Permeability ASTM ASTM E2357
  • Vapor Permability ASTM ASTM E96 (Procedure B)

Installation

SOPRASEAL LM 204 VP can be applied down to 25°F (-4°C) without the use of additional additives. The most effective application method utilizes spray equipment but a nap roller or a paint brush may also be used. Once the application is complete, inspect the wall for any light areas, blisters, holes or areas that need attention. Please refer to SOPREMA specifications and installation instructions for additional application guidelines prior to use.

 

Related Products

ALSAN® PRE-CUT FLEECE

ALSAN PRE-CUT FLEECE is a polyester fleece reinforcement that is pre-cut to fit typical roofing and waterproofing details. Convenient and…

View Product

SOPRA-TITE SENTINEL® Drip Edge

SOPRA-TITE SENTINEL® Drip Edge combines custom engineering and superior performance with an attractive appearance. The patented design of the extruded…

View Product

SOPRASEAL® Stick 1100T

SOPRASEAL Stick 1100T is a self-adhered waterproofing membrane. SOPRASEAL Stick 1100T is composed of a proprietary high quality elastomeric styrene-…

View Product

Related Projects

Northeast Louisiana State Office Building – Monroe, Louisiana

As an approved manufacturer for the State of Louisiana, the decision makers at the Facility Planning and Control Department were assured that the products installed offered unsurpassed quality. The final assembly was designed to meet FM Approvals 1-90 wind uplift test and proves to protect the building for many years to come.

Portland Bridge – Portland, Maine