SOPRALENE® 180 SP 3.5 SKU: 00621
SOPRALENE® 180 SP 3.5 SKU: 00621
SOPRALENE 180 SP 3.5 (sanded, polyolefin) is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. SOPRALENE 180 SP 3.5 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable non-woven polyester mat. The topside is surfaced with fine mineral aggregate and underside is surfaced with polyolefin burn-off film to optimize heat welding.
Product Properties
- ASTM ASTM D6164
- Component Base
- Installation Method Heat Welded
- Reinforcement Polyester
- Thickness (minimum) 130 mils (3.3 mm)
- Thickness (nominal) 138 mils (3.5 mm)
- Topside Sanded
- Underside Burn Off Film
Installation
Prior to installation, unroll SOPRALENE 180 SP 3.5 onto the roof surface and allow to relax. Position SOPRALENE 180 SP 3.5 in desired position and back roll the product. SOPRALENE 180 SP 3.5 is then heat welded to approved substrates. Subsequent approved inter-ply or cap ply membranes are applied to SOPRALENE 180 SP 3.5 via cold adhesive. Refer to the SOPREMA® SBS Roofing Guide for additional application guidelines.
Testing & Approvals
Related Products
SOPRA-XPS 35
SOPRA-XPS 35 are rigid thermal insulation boards made of extruded polystyrene closed-cell foam. SOPRA-XPS 35 is mainly used for SOPREMA…
View Product
COLPHENE® H
COLPHENE H is a hot-applied, rubberized asphalt composed of a select
blend of refined asphalts, recycled rubber and inert extenders.
ELASTOPHENE® STICK
ELASTOPHENE Stick is an SBS-modified bitumen, self-adhered base ply for use in approved multi-ply membrane and flashing assemblies. ELASTOPHENE Stick…
View ProductRelated Projects
University of Oregon Residence Hall – Eugene, Oregon
With a student population of over 24,000, the University of Oregon was in need of a new residence hall. When selecting an air barrier for the project, it was decided that SOPRASEAL® Stick VP and SOPRASOLIN® HD would be applied.
San Francisco War Memorial – San Francisco, California
SOPREMA’s advanced PMMA membrane system, ALSAN® RS 230 was chosen for waterproofing this international landmark because of the ease of installation in tight areas and short time schedule.