ALSAN® RS 260 LO FLASH SKU: L-RS0525
ALSAN® RS 260 LO FLASH SKU: L-RS0525
ALSAN RS 260 LO FLASH is a high-performance, low odor, rapid-setting, polymethacrylate (PMA) liquid resin for use in flashing applications. ALSAN RS 260 LO FLASH resin is combined with fleece fabric to form a monolithic, self-flashing and self-adhering reinforced waterproofing membrane. ALSAN RS 260 LO FLASH is available in a summer or winter formulations.
Product Properties
- Installation Method 2 Part
- Material Liquid
- Technology PMMA
Installation
Using a slow-speed (200 to 400 rpm) mechanical agitator, thoroughly mix the entire container of resin for two minutes before use. Only catalyze the amount of material that can be used within 10-15 minutes. Add the pre-measured catalyst to the resin component and stir for two minutes and apply to the substrate. Refer to the catalyst information found on the second page of the PDS. Apply without dilution or thinning.
After mixing, apply ALSAN RS 260 LO FLASH to prepared substrate at the required consumption using a roller or brush. The resin should be applied evenly onto the surface using care not to spread too thin or pool in low areas.
Refer to the ALSAN RS Roofing Technical Manual for additional application guidelines.
Testing & Approvals
Related Products
SOPRAFIX® MBBR BATTEN BAR
SOPRAFIX® MBBR Batten Bar (Metal Batten Bar Recessed) is a flat, nominal 1 inch wide AZ55 Galvalume metal bar with…
View ProductSOPRAFIX® MBB BATTEN BAR
SOPRAFIX® MBB (Metal Batten Bar) is a flat, nominal 1 inch wide AZ55 Galvalume metal bar with 3″ o.c. pre-punched…
View ProductALSAN® FLASHING
ALSAN FLASHING is a unique polyurethane bituminous resin specifically formulated for liquid-applied flashings, details and maintenance applications. ALSAN FLASHING utilizes…
View ProductRelated Projects
909 Walnut Fidelity Tower Building – Kansas City, Missouri
As the tallest apartment building in Missouri, the 909 Walnut Fidelity Tower Building has been refurbished to provide thirty-four floors of beautiful, spacious luxury suites for highrise living.
Beijing Zoo Road Bridge – Beijing, China
The Zoo Road viaduct bridge crosses Beijing Zoo, as a part of the infrastructure for Beijing 2008 Olympic Games. The waterproofing area is about 27,000 ft2, and completed October 2007. The waterproofing layer was installed by SOPREMA Macaden Automatic Installation System with 200 meter long SBS modified bitumen membrane—ANTIROCK.