COLVENT™ FLAM 180 TG SKU: 00375
COLVENT™ FLAM 180 TG SKU: 00375
COLVENT Flam 180 TG (torch grade) is an SBS-modified bitumen vented base ply for use in approved multi-ply membrane and flashing assemblies. COLVENT Flam 180 TG is reinforced with a tough, dimensionally stable non-woven polyester mat that is saturated and coated on both sides with a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen.
Product Properties
- ASTM ASTM D6164
- Component Base
- Installation Method Heat Welded
- Reinforcement Polyester
- Thickness (minimum) 110 mils (2.8 mm)
- Thickness (nominal) 118 mils (3.0 mm)
- Topside Burn Off Film
- Underside Burn Off Film
Installation
Prior to installation, unroll COLVENT Flam 180 TG onto the roof surface and allow to relax. Place COLVENT Flam 180 TG in desired position and back roll the product. COLVENT Flam 180 TG is then heat welded to approved substrates. Subsequent approved inter-ply or cap ply membranes are applied to COLVENT Flam 180 TG via heat welding.
Testing & Approvals
Related Products
ALSAN® TRAFIK RS 733 PART A
ALSAN TRAFIK RS 733 Part A is a high-performance rapid-setting, polymethyl methacrylate (PMMA) resin. ALSAN TRAFIK RS 733 PART A…
View Product
SOPRASEAL Liquid Flashing
SOPRASEAL Liquid Flashing is a high quality, 100% solid low odor elastomeric polyether membrane. SOPRASEAL Liquid Flashing material is designed…
View Product
SOPRA™ IV
SOPRA™ IV is a bitumen-coated base sheet for use in built up roof assemblies. SOPRA IV is composed of a…
View ProductRelated Projects
Chinese Hospital Outpatient Center – San Francisco, California
SOPREMA’s SENTINEL line was the product of choice for this project because of its proven quality, competitive pricing and superior technical support. Platinum Roofing, the contractor for the project, utilized SENTINEL G150, SENTINEL H2O Bonding Adhesive, SENTINEL VCM, and SENTINEL Prefabricated Corners and Pipe Flashings to complete the roof.