ALSAN® RS DETAILER SKU: L-RS016
![ET21073_Alsan_RS_Detailer_2kg](https://soprema.us/wp-content/uploads/2020/08/ET21073_Alsan_RS_Detailer_2kg.png)
ALSAN® RS DETAILER SKU: L-RS016
ALSAN RS DETAILER is a micro-fiber enhanced rapid-setting polymethyl methacrylate (PMMA) flashing resin. ALSAN RS DETAILER is used for waterproofing small and difficult penetrations where a standard ALSAN RS or ALSAN TRAFIK RS fully reinforced liquid membrane may not be applied.
Product Properties
- Installation Method 2 Part
Installation
Using a slow-speed (200-400 rpm) mechanical agitator, thoroughly mix the entire container of resin for two minutes before use. Only catalyze the amount of material that can be used within 10-15 minutes. Add the pre-measured catalyst to the resin, stir for two minutes and apply to substrate. The amount of catalyst required is determined by resin weight and ambient temperature. Refer to the catalyst information below.
Related Products
ANTIROCK®
ANTIROCK is an SBS-modified bitumen membrane designed to waterproof bridge decks. ANTIROCK is reinforced with a tough, dimensionally stable non-woven…
View Product![](https://soprema.us/wp-content/uploads/2023/12/Outside-Corner.png)
SENTINEL® KEE PREFABRICATED CORNERS
SENTINEL KEE PREFABRICATED CORNERS are manufactured from fiberglass reinforced 60 mil KEE membrane and intended to flash 90 degree outside…
View Product![](https://soprema.us/wp-content/uploads/2020/08/Drain-Box-1.png)
SOPRANATURE® DRAIN BOX
Manufactured from recycled acrylonitrile-butadiene-styrene (ABS) with narrow slots on the sidewalls and small holes on the top cover, SOPRANATURE DRAIN…
View ProductRelated Projects
MODE Apartments – Chicago, Illinois
The MODE Apartments located in Logan Square, just northwest of downtown Chicago, offers residents luxurious living both inside and out. SOPREMA’s SOPRANATURE® product line was used to develop the private patios and common areas that are available to residents.
Pearl Block 136 – Portland, Oregon
For this project, SOPREMA’s SOPRASEAL® product line was selected to provide an airtight barrier. The project was originally specified with another membrane, but due to poor adhesion, our SOPRASEAL Stick VP and SOPRASOLIN® HD products were substituted in.