SOPREMA

Search

ELASTOCOL™ STICK SKU: D38745

ELASTOCOL™ STICK SKU: D38745

ELASTOCOL™ Stick is an SBS polymer based primer for use in approved multi-ply membrane and flashing assemblies. ELASTOCOL Stick is comprised of a proprietary blend of SBS polymers, solvents and additives used to increase adhesion when using self-adhered SBS membranes. ELASTOCOL Stick may be applied to gypsum, masonry, metal, wood and SOPREMA® mineral aggregate surfaced membranes.

Product Properties

  • Base Solvent-Based
  • Overlying Application Self-Adhered
  • Type Primer

Installation

Mix prior to application. ELASTOCOL Stick is applied to the approved area via brush, roller or spray equipment. ELASTOCOL Stick is applied at a rate of 0.7 to 1 gallon per 100 square feet over non porous substrates. Refer to the SOPREMA SBS Roofing Manual for additional application guidelines.

 

Testing & Approvals

Related Products

ALSAN TRAFIK PU 120

ALSAN Trafik PU 120 is a two-component, low VOC, low odor, liquid applied primer. This primer provides excellent inter-coat adhesion…

View Product

ALSAN TRAFIK RS 789 LT

ALSAN® TRAFIK RS 789 LT is a high-performance, rapid-setting, polymethyl methacrylate (PMMA) liquid resin with integrally mixed aggregate. ALSAN® TRAFIK…

View Product

COLVENT™ FLAM 180 TG

COLVENT™ Flam 180 TG is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. COLVENT…

View Product

Related Projects

Michigan State University – East Lansing, Michigan

The facilities management staff at Michigan State University is responsible for over 17,000,000 sq.ft. of roofs. When the staff determines that a re-roof of one of the 580 buildings on campus is necessary, options are limited to known and trusted manufacturers that offer systems with superior in-field performance, such as SOPREMA.

The Westin Savannah Harbor – Savannah, Georgia

The Westin was due for a roof replacement on 17,828 square feet of its property. To complete the project, SOPREMA’s SOPRAISO ™, DUOTACK®, SENTINEL® P-150, and ALSAN® RS 230 Flash were selected. These products allowed for the design to meet FM 1-120 codes and the use of ALSAN RS 230 Flash solved any difficult flashing details which was only one of many reasons
SOPREMA products were selected.